When your radio transmitter drops off the air alert at 3 a.m., every minute counts. If your broadcast monitor, remote control system, or silence detector already sends email alarms, TextBolt email to text gateway converts them into SMS for your on-call staff. It works with Inovonics, Burk ARC, Broadcast Tools, Davicom, Sine Systems, CircuitWerkes, and other platforms that support SMTP notifications, replacing discontinued carrier email-to-SMS gateways like @vtext.com, @txt.att.net, and @tmomail.net so critical off-air alerts reach engineers as text messages instead of sitting unread in an inbox.
Up to 98%
Delivery Rate
30 min
Setup Time
Up to 10
Team Members (Multi-User Access)
Challenges
FM, AM, LPFM, translator/booster, college, religious, public radio, and TV stations need reliable alerts when equipment fails. Outdated gateways, missed notifications, and routing issues can leave engineers unaware of critical off-air events.
T-Mobile shut down its @tmomail.net gateway on Dec 14, 2024. AT&T shut down its @txt.att.net gateway on Jun 17, 2025. Verizon’s @vtext.com gateway sunsets Mar 31, 2027, with rising silent drops already showing up in the meantime. Sprint’s gateway was absorbed into T-Mobile years ago. Any station still routing off-air monitors, remote controls, or STL alarms through these addresses has an alert path that is already broken or quietly failing.
Your off-air monitor catches loss of modulation or RF carrier loss within seconds and fires off an SMTP alarm. But during an overnight outage, that email alert may sit unread while the on-call engineer is away from a workstation, responding to another site issue, or relying on a notification path that no longer works. The station remains off the air until an engineer sees the alert, manually checks the system, or someone reports the problem.
If the monitor itself loses power or drops off the network, that’s visible. But if the monitor’s email fires correctly and the failure is in the SMS-gateway hop, your engineering team has no idea the alert chain is dead. Silence-sensor, STL-loss, or exciter-fault alerts can fail silently before anyone realizes the notification path itself has gone dark.
Carrier gateways accepted exactly one phone number per recipient field. If the primary on-call engineer was in a dead cell zone at the transmitter site, driving between sticks, or simply asleep, the alarm sat in an inbox until someone happened to look. Chief engineer, assistant/contract engineer, on-call board op, and GM could not all be paged in parallel from a single fault condition mains loss, generator failure, or tower light outage.
Chief engineers, contract engineers, and regional broadcast teams often manage multiple stations and remote facilities spread across different locations. With hours of travel between transmitter sites, translators, and boosters, a fault at one location can go unnoticed if alerts do not reach them quickly. SMS notifications help ensure engineers know about critical issues even when they are away from a workstation.
When the notification chain fails, the first indication of an outage may come from a listener, station staff member, or manual system check. A missed silence-sensor, STL-loss, or equipment alert can delay response and leave engineers troubleshooting an issue they should have known about earlier. Reliable SMS notifications help ensure critical off-air alerts reach the right people before downtime becomes a public-facing problem.
Solution
TextBolt is a registered, 10DLC-compliant email-to-SMS platform built to replace legacy carrier gateways. Keep your monitors, alarm thresholds, macros, and alert templates unchanged just update the SMTP address.
Off-air, carrier-loss, and modulation-loss alerts are converted into text messages so engineers receive them on their phones instead of relying only on email notifications.
One triggered alarm — dead air, STL link loss, exciter fault, AC mains loss, generator failure, tower light outage — can reach multiple team members, including engineers and operators, at the same time.
Inovonics, Burk, Broadcast Tools, Davicom, Omnia, Wheatstone, Telos Axia, Nautel, GatesAir, Playoutone, AIIR, and any other broadcast monitor or playout automation platform sold in the last two decades that can send an SMTP alert.
TextBolt issues a registered business toll-free number for every account. Off-air alerts deliver as legitimate business SMS, not flagged as spam the way consumer-grade short codes are. The same number sends every alert, so engineers recognize it instantly as “the transmitter” texting, not an unknown number.
The change is one line: your monitor’s SMTP recipient address. Replace 5551234567@txt.att.net with +15551234567@sendemailtotext.com. Your monitor, remote control unit, STL alarm relay, transmitter SNMP/SMTP alerts, thresholds, escalation settings, and alert templates stay exactly as they are.
Every off-air alert is timestamped and searchable: sender, recipient, delivery status, full alarm body. Carrier gateways silently dropped alerts and truncated message text mid-alarm. TextBolt logs every send with the full alarm payload preserved useful for FCC public-file documentation, internal chief-engineer review, and dispute resolution with your insurer or ownership group.
Getting Started
Total hands-on time, including a live silence injection at the transmitter or studio to confirm the text actually arrives, is well under an hour. No developer, no rack work, no new hardware, no truck roll to the tower site.
Create your account, list the engineers who should receive off-air alerts (chief engineer, contract engineer, on-call board op, GM), and choose your plan. Solo stations and single-transmitter operations start on Basic; clusters and multi-tower groups start on Standard.
TextBolt assigns a dedicated business number and a matching gateway address. The same number sends every off-air alert across your station group one recognizable sender for dead air, STL loss, RF fault, and generator alarms alike.
Submit your business documents for 10DLC compliance so SMS sends from a carrier-trusted business sender instead of a flagged short code. Approval typically takes 24-48 hours.
In your off-air monitor’s, remote control’s, or automation system’s alert-recipient field, replace the legacy carrier-gateway address with +1[phone]@sendemailtotext.com. Same phone number, only the domain changes no re-terminating wiring, no touching the RF chain.
Press your monitor’s “Send Test Alert” button, or physically mute studio audio / pull modulation for 30 seconds to force a genuine silence-sensor trip. The off-air SMS should land on the engineer’s phone within 10-30 seconds. Confirm the alarm body, threshold value, and station call sign/identifier all read correctly.
Add additional +1[phone]@sendemailtotext.com recipients for the on-call tech, assistant/contract engineer, and GM as a silent backup path. Most monitors and remote controls accept a comma-separated list or one row per recipient in the alarm-notification setup.
Process
Your off-air monitor, transmitter remote, or automation system already emails alarms: silence, low modulation, carrier loss, exciter fault, STL/TSL loss, high VSWR, mains breaker trip, generator run/fail. Point the SMTP recipient at your gateway address (+15551234567@sendemailtotext.com), and Inovonics, Burk, Davicom, Nautel, GatesAir, WideOrbit, NexGen, Enco, and similar systems deliver those alerts as SMS automatically.
Volunteer-staffed LPFM, college, or small religious operations without a network-attached monitor: the chief engineer composes a station-status alert from any email client (Gmail, Outlook, Apple Mail, Thunderbird, or others). Address it to the recipient phone plus the gateway domain, e.g. +15551234567@sendemailtotext.com, and hit send. Useful for tower-crew dispatch, transmitter-site access coordination, and EAS acknowledgements.
If your monitor, STL, or vendor appliance has a hard-coded SMTP destination it always sends to, set up a forwarding rule on the receiving inbox (Office 365, Google Workspace, your station’s mail server). Alarm emails land in the inbox, auto-forward to the TextBolt gateway, and convert to SMS without touching the monitor’s locked configuration or voiding a support contract.
Use Cases
From small-market stations to multi-site broadcast networks, TextBolt helps convert existing email-based monitoring alerts into SMS notifications so engineers can respond faster to off-air events and equipment failures.
Small and regional broadcasters often manage multiple transmitter sites with limited engineering resources. TextBolt helps ensure chief engineers, contract engineers, and technical staff receive critical alerts when they are away from a workstation or monitoring email.
LPFM and non-commercial stations often operate with smaller teams and limited technical resources. TextBolt provides a simple way to deliver existing email-based alerts as SMS notifications without replacing current monitoring systems.
College stations often rely on a mix of student operators, faculty advisors, and part-time engineering support. SMS alerts help ensure the right people receive notifications about silence, equipment faults, or transmitter issues when problems occur.
Religious broadcasters with multiple facilities or remote transmission sites need reliable communication between equipment and engineering teams. TextBolt helps deliver alerts for dead air, transmitter issues, and other operational events directly to responsible staff.
Public radio organizations often operate multiple facilities, translators, and remote systems that require dependable monitoring. TextBolt provides an additional SMS notification path for engineering teams managing distributed broadcast infrastructure.
Remote translators, boosters, TV facilities, and streaming platforms often depend on automated monitoring systems. Any platform that can send SMTP email alerts can use TextBolt to convert those notifications into SMS messages for faster response.
Comparison
Free carrier gateways are failing or shutting down. Custom integrations add developer work and per-message fees. TextBolt is a drop-in email-to-SMS gateway that adds reliable SMS delivery to existing off-air monitors or remote controls without rack changes, code, or per-message fees.
@txt.att.net, @tmomail.net, @vtext.com
The free email-to-SMS path broadcast engineers used for 20 years. Shut down or deprecated. Silently drops alarms, truncates message bodies mid-alert, accepts one phone per recipient field, aggressive spam filtering, no audit trail.
Recommended
Flat monthly plan, no per-node license
Email-to-SMS gateway built for broadcast alerting. Your existing monitor’s SMTP alert email becomes an SMS. Nothing in the rack changes; an SMS capability gets added on top.
$15-100+/month minimum + per-message fees + dev time
Roll your own SMS gateway against a generic SMS API. Your monitor still only emits email, so you also build an email-to-API bridge. Powerful and flexible, but heavy lift for a station group.
Benefits
Carrier-trusted SMS, fan-out to every engineer who should know, and a price built for FM/AM/LPFM/college budgets, not enterprise dashboards.
Up to 98%
Delivery Rate
30 min
Setup Time
Up to 10
Team Members (Standard Plan)
10-30 sec
Alert Arrival Time
Industries
TextBolt helps organizations deliver critical monitoring alerts as SMS messages, ensuring engineers, operators, and technical teams receive notifications when broadcast, streaming, or media systems report failures.
Radio and TV stations use TextBolt to notify engineering teams about transmitter faults, STL issues, automation failures, silence alarms, and other broadcast system alerts.
Streaming teams use TextBolt to alert on-call engineers when monitoring systems detect encoder failures, ingest problems, stream interruptions, or delivery issues during live events.
Campus radio stations, student media teams, and AV departments use TextBolt to notify technical staff when broadcast, streaming, or production systems require attention.
Public broadcasters, government-operated media facilities, and community access channels use TextBolt to deliver operational alerts to engineers managing distributed broadcast infrastructure.
Community radio stations, nonprofit media organizations, and religious broadcasters use TextBolt to notify staff and volunteers when monitoring systems generate alerts for broadcast or streaming issues.
Remote transmitter facilities often operate without staff on-site. TextBolt helps deliver alerts for RF issues, power failures, equipment faults, and other conditions detected by monitoring systems.
Got questions? We’ve got answers.
Yes, if your monitor, remote control, or automation system can send SMTP/email alerts, TextBolt can convert those alerts into SMS notifications. This includes many systems from manufacturers such as Inovonics, Burk, Broadcast Tools, Davicom, Nautel, GatesAir, and other platforms that support email-based alerts.
No. The change is updating the SMTP recipient address in your monitor’s or remote control system’s existing alert configuration.
Legacy carrier email-to-SMS gateways have been discontinued or are becoming unreliable for critical alerts. Migrating to a dedicated email-to-SMS service helps avoid gaps in your alert delivery path.
Typically 10-30 seconds after your monitor or remote control fires the SMTP alarm.
Yes. TextBolt can deliver alerts to multiple recipients based on your account configuration.
Yes. TextBolt sends the alert content provided by your monitoring system, including any alarm details included in the original message.
Yes. Any broadcast, streaming, or monitoring system that can send an SMTP/email alert can use TextBolt to deliver that notification as SMS.
TextBolt replaces the email-to-SMS delivery layer without requiring you to replace your existing monitoring platform.
Yes. Any workflow that can generate an email alert can use TextBolt to send SMS notifications.
TextBolt handles the SMS delivery step after receiving the alert email. The reliability of the complete chain depends on your monitoring system, email server, and network connectivity.
Stop Missing Overnight Off-Air Events
Replace your shutdown carrier gateway in about 30 minutes. Send off-air alerts as SMS to every engineer who needs to know like chief engineer, on-call tech, contract engineer, GM with a 10DLC-compliant business sender and full audit trail.

Convert network downtime alerts from SolarWinds NPM, PRTG, Nagios, Zabbix, or any monitoring tool into text. Catch WAN, VPN, and MPLS outages in seconds.

Get incident alerts via text. Notify your on-call team instantly from any monitoring tool (Grafana, Datadog, Nagios). Up to 98% delivery, no code needed.

Get emergency alerts via text. Notify your team instantly from monitoring systems, alarms, or any email source. Up to 98% delivery, audit trails included.